We have partnered with Quad 66 (Mike Puchowicz) to provide the manufacturing and shipping of his design. With the purchase of this frame, we provide all CF. Normal cutting time is about 3 - 5 days from the time of order but can be affected when there is a high cutting volume in the shop.
For any 3d printing needed for the frame, please check out https://www.brain3d.co/ and they will help with anything you need.
WarPig 122 Gen 5 Zero
The WarPig 122 Gen 5 Zero is a robust lightweight frame intended for 1203 - 1204/1303 1-3 S builds with 3
inch props. The 122 mm size is the minimal wheelbase that will keep the air clean under/around the
props maximizing both agility and efficiency. In the 4 mm thickness, the frame is tolerant of fairly
noisy builds without any troublesome low frequency resonance. Clean builds can save a little weight
with the 3 mm thickness, while the 2.5 mm thickness is for clean 1S builds only. The WarPig frames are
designed to allow a low and forward camera position in front of the flight controller. This position
decreases the amount of props in view and gives the ideal prop level perspective. Whoop style canopies
can also be used for those preferring the whoop canopy builds.
"Zero" frames are compatible with a cage style canopy (coming soon) optimized for the HDZero Nano
Lite Camera and Whoop Lite VTX.
Frame: 122 mm MTM, 2.5 mm, 3 mm, or 4 mm thick
FC: 25.5 x 25.5 AIO whoop orientation, 25.5 x 25.5, 20 x 20, 16 x 16 square orientation
Motor Mounting: M2 on 9 mm diameter
Props: 3 inch
Canopy: Printed canopy or whoop (Free printed canopy file: https://ko-fi.com/quad66/shop)
Weight (approximate): 7.6 gm (3 mm)
For more information on suggest builds and tunes:
Note: We are not the designer and are not responsible if the frame isn't as you want. We only cut the files provided and its your responsibility you do your research about the frame before purchasing. Frame are all custom cut and are started once an order is placed. If you have any questions or concerns, please message us at [email protected]
, and someone will get back to yo as soon as possible. It is also suggested to check the Facebook groups or contact the designer if you have any other questions.
If you can't find what you are looking for and want to design your own, we would be happy to help out and provide a custom quote.
Files lasted updated with Cncmadness on Sep 20, 2022