The BabyMOD 2.5-3-3.5 inch HD FPV Frame

This is an open-source frame which we provide the carbon fiber and hardware. Files for the 3d printed parts can be found at the Thingiverse links below. The 3" and 3.5" both include the front brace. We have also updated the files for the two options with braces to have them built into the frame as one piece. 

The files for this open source frame can be found at https://www.thingiverse.com/thing:4660219

You can also support the designer by checking out these links as well. 

Note: We are not the designer and are not responsible if the frame is not as you hopped. We only cut the files provided and it's your responsibility you do your research about the frame before purchasing. Frames are all custom cut and are started once an order is placed. If you have any questions or concerns, please message us at [email protected], and someone will get back to yo as soon as possible. It is also suggested to check the Facebook groups or contact the designer if you have any other questions. 

If you cannot find what you are looking for and want to design your own, we would be happy to help out and provide a custom quote. 

Files lasted updated with Cncmadness on July 21, 2021