This is an open-source frame which we provide the carbon fiber and hardware. A purchase is not a purchase of a product, but a request for cutting the parts. Normal cutting time is about 3 - 5 days from the time of order but can be affected when there is a high cutting volume in the shop. Files for the 3d printed parts can be found at the Thingiverse links below. For details on the frame, please make sure to check the links as we are not the designer and not responsible if the frame is not what you expected. If you have any questions, you can message us and we will do our best to answer.
As we don’t have the suggested hardware the designer used, we will be providing either M2 nuts or a CF spacer to the kits to fill the gap at the front and back of the frame. We don’t stock 18mm standoffs so we have provided spacers and also increased the material thickness to help with the assembly based on the hardware we have in stock. Please reach out to us if you have any concerns or questions
The files for this open source frame can be found at https://www.printables.com/model/281119-the-picklewhoop-20-25-30-cinematic-whoop-frame
For any 3d printing needed for the frame, please check out https://www.brain3d.co/ and they will help with anything you need.
Note: We are not the designer and are not responsible if the frame is not as you hopped. We only cut the files provided and it's your responsibility you do your research about the frame before purchasing. Frames are all custom cut and are started once an order is placed. If you have any questions or concerns, please message us at [email protected]
, and someone will get back to yo as soon as possible. It is also suggested to check the Facebook groups or contact the designer if you have any other questions.
If you cannot find what you are looking for and want to design your own, we would be happy to help out and provide a custom quote.
Files lasted updated with Cncmadness on Oct 25, 2022