We have partnered with Stefan Van der Ende to provide the manufacturing and shipping of this design. With the purchase of this frame, we provide all CF and Hardware for the frame. Our production goal for this frame is 3 - 5 days but can be affected buy work load at the time of the order.
For any 3d printing needed for the frame, please check out https://www.brain3d.co/ and they will help with anything you need.
Freestyle / mid range
Slightly stretched 1 : 1,09
417mm motor to motor
!0 inch props
7mm arms 18mm wide arms
19X19 motor screw mounting pattern dedicated space DJI module in the back center 30X30 mounting 30X30 and 20X20 in the back. Advised motors T5 1050Kv or similar size esc,s APD80 on arms 4 in 1 esc,s minimum around 60A
2 versions :
417M : for Micro cam size 19mm wide between cam plates
round motor mount shape
417R for DJI FPV cam size in between cam plates 20,5mm
Hand shaped end of arms motormount shape
Note: We are not the designer and are not responsible if the frame is not as you hoped. We only cut the files provided and it's your responsibility you do your research about the frame before purchasing. Frames are all custom cut and are started once an order is placed. If you have any questions or concerns, please message us at [email protected]
, and someone will get back to yo as soon as possible. It is also suggested to check the Facebook groups or contact the designer if you have any other questions.
Files lasted updated with Cncmadness on Aug 26, 2022