We have partnered with Hurcan Yilmazer to provide the manufacturing and shipping of his design. This is not an Open source frame and we can not provide files or changes to this frame. With the purchase of this frame, we provide all CF and Hardware for the frame. Normal cutting time is about 3 - 5 days from the time of order but can be affected when there is a high cutting volume in the shop.
Hurricane 2inch Fpv Drone Frame,
- Best option for going fast through tight gaps,
- Minimizing the risk (while flying close to a talent or flying at delicate spaces)
- Will have the best flight control with the stiff carbon cage design so can be tuned to be precise with the least amount of noise in gyro compared to other 2 inch FPV drone options.
-Naked gopro can be mounted at the top front, top back or bottom back as needed for the videoshoot.
Not Good for;
- Long flights. (Longest flight will be around 5 mins)
- Long dives (will likely wobble at the end of a dive if used with 3s)
- Windy outdoor spaces.
* 5.30 min flight time with 3s 750mah Tattu Battery.
* 14mm camera mount
* 25.5mmx25.5mm AIO FC mount
* 20x20 Decased Vista Mount.
* 9x9 motor mount
1- 25.5mmx25.5mm AIO FC
2- Decased Vista with Nebula Pro Nano
3- Mamba 1105 5400kv motors
4- 4 blade Gemfan Props
5- 28x 6mm m2 Titanium screws (for frame only)
6- 14X 20mm AL standoffs (for frame only)
For any 3d printing needed for the frame, please check out https://www.brain3d.co/ and they will help with anything you need.
Note: We are not the designer and are not responsible if the frame is not as you hoped. We only cut the files provided and it's your responsibility you do your research about the frame before purchasing. Frames are all custom cut and are started once an order is placed. If you have any questions or concerns, please message us at [email protected]
, and someone will get back to yo as soon as possible. It is also suggested to check the Facebook groups or contact the designer if you have any other questions.