This is an open-source frame which we provide the carbon fiber and hardware. A purchase is not a purchase of a product, but a request for cutting the parts. Normal cutting time is about 3 - 5 days from the time of order but can be affected when there is a high cutting volume in the shop. Files for the 3d printed parts can be found at the Thingiverse links below. For details on the frame, please make sure to check the links as we are not the designer and not responsible if the frame is not what you expected. If you have any questions, you can message us and we will do our best to answer.
The FRL is an open source frame designed by Stynkebutt(Jerermy Mariscal). More details can be found at the following link.
Link to open source files and info
FRL 7" HD (Vista) Compatible Frame - Smaller lighter bottom mount battery frame that builds on the FR line of frames.
Props In View with bottom mounted motors
DJI (4:3): 25-27deg or less
Hero8/9 (Superview w/o Hypersmooth): 17deg or less
Hero8/9 (Wide w/o Hypersmooth): -2deg or less
Recommended Plate Thicknesses:
Mid Plate: 2.5mm, Requires qty 9, 3mm pressnuts
Bottom Plate: 2.0mm
Top Plate: 2.0mm, FRL logo cut 1mm deep, Requires qty 2, 3mm Pressnut
Front Arm: 6mm
Rear Arm: 6mm
Arms are not chamfered
Note: We are not the designer and are not responsible if the frame isn't as you want. We only cut the files provided and its your responsibility you do your research about the frame before purchasing. Frame are all custom cut and are started once an order is placed. If you have any questions or concerns, please message us at [email protected]
, and someone will get back to yo as soon as possible. It is also suggested to check the Facebook groups or contact the designer if you have any other questions.
If you can't find what you are looking for and want to design your own, we would be happy to help out and provide a custom quote.
Files lasted updated with Cncmadness on Aug 11, 2022