This is not an Open source frame and we can not provide files or changes to this frame. With the purchase of this frame, we provide all CF and Hardware for the frame. Our production goal for this frame is 3 - 5 days but can be affected buy work load at the time of the order.
For any 3d printing needed for the frame, please check out https://www.brain3d.co/ and they will help with anything you need.
This is the toothpick version of the Dragonfly Lite 3 inch Toothpick freestyle frame. This is a high-performance toothpick frame, but with a squish-x layout for maneuverability. It also has replaceable arms for quick and easy repairs. This is perfect for any 3-inch toothpick build from 1-3s. Flight controllers with a bottom usb port need to be mounted upside down on this frame. Batteries can be mounted normally or mounted toilet-tank style with a rubber band. When building the frame, the center screw securing the arms needs to face down to leave room for the AIO, and the other screws can be mounted in any orientation.
- Squish-x layout
- 25.5mm x 25.5mm whoop AIO mounting holes
- 9mm motor mounting holes
2.5 mm thick arms
1.5 mm thick top plate
1.5 mm thick bottom plate
5x M2 locknuts
5x M2 x 10 screws for arms (1 for center)
4x M2 x 20 screws recommended for mounting AIO, vtx, and canopy
Note: We are not the designer and are not responsible if the frame is not as you hoped. We only cut the files provided and it's your responsibility you do your research about the frame before purchasing. Frames are all custom cut and are started once an order is placed. If you have any questions or concerns, please message us at [email protected]
, and someone will get back to yo as soon as possible. It is also suggested to check the Facebook groups or contact the designer if you have any other questions.
Files lasted updated with Cncmadness on Aug 9, 2022