We have partnered with Chris Rosser to provide the manufacturing and shipping of his design. This is not an Open source frame and we can not provide files or changes to this frame. With the purchase of this frame, we provide all CF and Hardware for the frame. Normal cutting time is about 3 - 5 days from the time of order but can be affected when there is a high cutting volume in the shop.
Please check out the designers website at https://www.aos-rc.com/ for more details or to contact them for additional details.
For any 3d printing needed for the frame, please check out https://www.brain3d.co/ and they will help with anything you need.
The toothpick class has always been about incredible flight performance in a tiny form factor. The 5" Class has always provided the most dynamic and energetic flying experience. It seems only natural to try to combine the benefits of both in an ultralight 5" frame. THE UL5 O3 has an updated camera cage to support the new DJI O3 air unit.
A key limitation with ultralight 5" frame design is resonance performance. Placing the motors on the end of very long spindly arms creates a spring-mass system that is prone to resonance in a number of different modes. The AOS UL5 uses finite element simulation to model these modes and topology optimization to identify the most efficient places to add material to counteract them, maximize stiffness and increase durability.
The result is a frame that weighs only 68g with resonance perfromance that exceeds frames weighing twice as much. This allows you to run less filtering and higher D gains to unlock spectacular flight performance and unmatched propwash handling.
* Standoffs, carbon and steel frame screws included
* ~68g with steel hardware
* Designed for 5" biblade props
* 5 mm Arms
* 1.5 mm Top Plate, Bottom Plate and Sandwich Plates
* One 25.5 or 20 mm mounting up front and one 25.5 or 20 mm mounting in the rear OR One central 30.5, 25.5, 20 mm stack.
* Fits the DJI Caddx Vista perfectly
* Fits 19 mm and 20 mm cameras
* Recommended components:
* 2004 motors
* 30A or higher toothpick AIO
* Caddx Vista + Nebula Pro
* 4S ~800mAh or 6S ~500mAh w/ XT30
Note: We are not the designer and are not responsible if the frame is not as you hoped. We only cut the files provided and it's your responsibility you do your research about the frame before purchasing. Frames are all custom cut and are started once an order is placed. If you have any questions or concerns, please message us at [email protected]
, and someone will get back to yo as soon as possible. It is also suggested to check the Facebook groups or contact the designer if you have any other questions.
Files lasted updated with Cncmadness on Dec 8, 2022