We have partnered with AirBlade to provide the manufacturing and shipping of this design. With the purchase of this frame, we provide all CF and Hardware for the frame. Our production goal for this frame is 3 - 5 days but can be affected buy work load at the time of the order.
For any 3d printing needed for the frame, please check out https://www.brain3d.co/ and they will help with anything you need.
AirBlade Transformer Mini 4 inch Long Range FPV
Note: We made a small revision to the camera cage design in our 2nd batch to include a mounting hole for carrying optional HD camera like the Insta360 Go
or GoPro Lite
(Naked GoPro). The included hardware DOES NOT include standoffs and screws for this hole. The hole is purely for mounting HD camera, you don't need to add hardware under normal circumstances.
When we set out to design the frame, we had a few goals in mind
- Compact design for easy transportation
- Yet spacious enough to build with a dual stack design
- No props in camera view
- Compatible with a wide variety of electronics
- Compatible with Caddx Vista for those who run DJI HD system
Double stack design with 16x16, 20x20 and 26x26 (only in front) mounting holes
BetaFPV AIO Firmware Flashing Guide:
JazzMaverick Firmware (G_H_25_REV16_73.HEX):
Special thanks to Josh Close Alderboy and Stew Alcock ChaosFPV for the PIDs & Filters settings (check the image gallery)
1 x Top Plate (2mm)
1 x Bottom Plate (2.5mm)
2 x Side Plates (1.5mm)
1 x Hardware pack
We are not the designer and are not responsible if the frame is not as you hoped. We only cut the files provided and it's your responsibility you do your research about the frame before purchasing. Frames are all custom cut and are started once an order is placed. If you have any questions or concerns, please message us at [email protected]
, and someone will get back to yo as soon as possible. It is also suggested to check the Facebook groups or contact the designer if you have any other questions.
Files lasted updated with Cncmadness on Sep 1, 2022