We have partnered with AirBlade to provide the manufacturing and shipping of this design. With the purchase of this frame, we provide all CF and Hardware for the frame. Our production goal for this frame is 3 - 5 days but can be affected buy work load at the time of the order.
For any 3d printing needed for the frame, please check out https://www.brain3d.co/ and they will help with anything you need.
The AirBlade Intrepid Mini is designed to take advantage of all the recent advancements in drone electronics while maintaining the core philosophy of the Intrepid design which is a top mount freestyle-oriented design.
Introducing the AirBlade Intrepid Mini Ultralight Toothpick
The AirBlade Intrepid Mini features a simple cage design to protect the camera, now compatible with 14mm nano FPV camera only. The arm is geometry is true X and the frame is cut so that the arm runs along the carbon weave for added rigidity. The top place is fixed at 20mm distance from the bottom plate, allowing ample vertical space for video transmitter, receiver and a Split 3 Nano Whoop Board
should you want to run HD camera on this bad boy!
The battery can be either top mounted or bottom mounted depending on your preference. This is an affordable and great alternative to the Armattan Tadpole.
Watch Albert Kim's review of the AirBlade Intrepid Mini
- Prop size: 3 inch
- Compatible with 26x26 and 16x16 stack mounting holes
- Motor mount: 9mm
- Top-mounted battery design
- Compatible with RunCam Nano 2 and other similar nano cameras
- Top plate fixed at 20mm
- Unibody with arms cut along the carbon weave for added rigidity
- Frame weight (without hardware): 17g
1 x Top Plate (1.5mm)
1 x Bottom Plate (2mm)
2 x Side Plates (1.5mm)
1 x Hardware pack
Note: We are not the designer and are not responsible if the frame is not as you hoped. We only cut the files provided and it's your responsibility you do your research about the frame before purchasing. Frames are all custom cut and are started once an order is placed. If you have any questions or concerns, please message us at [email protected]
, and someone will get back to yo as soon as possible. It is also suggested to check the Facebook groups or contact the designer if you have any other questions.
Files lasted updated with Cncmadness on Aug 26, 2022