This is an open-source frame which we provide the carbon fiber and hardware. A purchase is not a purchase of a product, but a request for cutting the parts. Normal cutting time is about 3 days from the time of order but can be affected when there is a high cutting volume in the shop. Files for the 3d printed parts can be found at the Thingiverse links below. For details on the frame, please make sure to check the links as we are not the designer and not responsible if the frame is not what you expected. If you have any questions, you can message us and we will do our best to answer.
The Side plate version of the frame has taken the original design and added two CF side plates for the camera so 3d printed parts are not needed. The camera spacing as been set to 20mm. We have personally not built this frame and it was done with a request from a customer. If you have any questions about this version, please ask and I will do my best to help out. I can provide any measurements needed if you want to check anything.
All version of the frame have been updated to use Pressnuts which are installed on the CF plate instead of needing Nylocks.
Source files: https://www.thingiverse.com/thing:4297557
Arm braces are also available for all versions and were created by Cncmadness
All frames kits include hardware.
Note: We are not the designer and are not responsible if the frame isn't as you want. We only cut the files provided and its your responsibility you do your research about the frame before purchasing. Frame are all custom cut and are started once an order is placed. If you have any questions or concerns, please message us at [email protected]
, and someone will get back to yo as soon as possible. It is also suggested to check the Facebook groups or contact the designer if you have any other questions.
If you can't find what you are looking for and want to design your own, we would be happy to help out and provide a custom quote.
Files lasted updated with Cncmadness on Oct 23, 2021