Frame plates: 2.0mm and 3.0mm
Description from Designer:
A beefy "classic X" frame design that leaves plenty of space for the props to breathe.
This frame fits standard fullsize FPV cameras or micro/mini cameras using the adapter brackets they come with. The motor mounting slots accommodate M3 19x19 through 25x25 motor mounting patterns. The arm's motor ends are sized big enough to provide some protection for 32xx size or smaller motors. 30.5x30.5mm and 20x20 FC/ESC stack mounting holes. The extra wide main plates comfortably fit an APD PDB360 or BrainFPV Radix2 8S/160a PDB or the Matek PDB-HEX. Room and mounting holes in the rear for a Caddx Vista HD Unit, 120mm camera cable is required. This frame can swing a maximum 11" prop.
Recommended powertrain would be minimum 2816 and maximum 3220 size motors. For 6S setup recommend 900-1050kv motors, a 60a 4in1 ESC, and a 2200mah-4000mah battery. For 8S setups I recommend 640-760kv motors.
This frame is made to use all the open source TBS SourceOne GoPro and rear antenna mounts.
3D Printed Parts:
Note: We are not the designer and are not responsible if the frame isn't as you want. We only cut the files provided and its your responsibility you do your research about the frame before purchasing. Frame are all custom cut and are started once an order is placed. If you have any questions or concerns, please message us at [email protected]
, and someone will get back to yo as soon as possible. It is also suggested to check the Facebook groups or contact the designer if you have any other questions.
If you can't find what you are looking for and want to design your own, we would be happy to help out and provide a custom quote.
Files lasted updated with Cncmadness on Jan 27, 2022