This is not an open-source frame, we have partnered with Multicopter Builders to provide this frame which includes the carbon fiber and hardware. A purchase is not a purchase of a product, but a request for cutting the parts. Normal cutting time is about 3 - 5 days from the time of order but can be affected when there is a high cutting volume in the shop. Files for the 3d printed parts can be found at the Thingiverse links below. For details on the frame, please make sure to check the links as we are not the designer and not responsible if the frame is not what you expected. If you have any questions, you can message us and we will do our best to answer.
1A. Arms - 4.0mm Carbon Fiber
1B. Arms - 5.0mm Carbon Fiber
1C. Arms - 6.0mm Carbon Fiber
1D. Arms - 4.0mm Foam Core
1E. Arms - 5.0mm Foam Core
2. Top Plate
3. Bottom Plate
4. Mid Plate w/Pressnuts
Note: We are not the designer and are not responsible if the frame isn't as you want. We only cut the files provided and its your responsibility you do your research about the frame before purchasing. Frame are all custom cut and are started once an order is placed. If you have any questions or concerns, please message us at [email protected]
, and someone will get back to yo as soon as possible. It is also suggested to check the Facebook groups or contact the designer if you have any other questions.
If you can't find what you are looking for and want to design your own, we would be happy to help out and provide a custom quote.