This is an open-source frame which we provide the carbon fiber and hardware. A purchase is not a purchase of a product, but a request for cutting the parts. Normal cutting time is about 3-5 days from the time of order but can be affected when there is a high cutting volume in the shop. Files for the 3d printed parts can be found at the Thingiverse links below. For details on the frame, please make sure to check the links as we are not the designer and not responsible if the frame is not what you expected. If you have any questions, you can message us and we will do our best to answer.
This frame was designed by Dave C and has been a very popular choice. Only option #1 is from Dave C, the rest are changes we have done to the frame by request or from customers submitting the changed files. There should be a set to fit any need. All versions have the 20x20 in the back for the Vista and the options listed are for the middle FC mounting.
1. 4" 16x16 FC(Original)
2. 4" 20x20 FC
3. 4" Whoop/20x20 FC
4. 4" 20x20 Side plates
5. 4" 16x16 FC Single Plate(3.0mm Base)
6. 4" 20x20 FC Single Plate(3.0mm Base)
Note: We are not the designer of the frame or parts and are not responsible if the frame is not as you hoped. We only cut the files provided and it's your responsibility to do your research about the frame before purchasing. Frames are all custom cut and are started once an order is placed. If you have any questions or concerns, please message us at [email protected], and someone will get back to you as soon as possible. It is also suggested to check the Facebook groups or contact the designer if you have any other questions.
If you can't find what you are looking for and want to design your own, we would be happy to help out and provide a custom quote.
Files lasted updated with Cncmadness on Jan 1, 2021